Energy Storage Battery
Introduction:
Energy storage batteries are devices that store electrical energy for later use. They're key to balancing energy supply and demand, especially in renewable energy systems (like solar and wind) where power generation is intermittent.
In Sano Energy, the storage batteries are mainly Lithium Iron Phosphate (LFP: LiFePO₄) batteries, which can be low-voltage batteries, high voltage batteries, wall-mounted batteries, modular batteries and battery energy storage systems (BESS).
Low-Voltage Batteries: RL Series iBAT-R-5.12L
-
High Performance
LFP battery cell, safe and reliable 24-hour standby power, worry free in case of blackout; Single battery 5.12kWh, expandable to 30.72kWh; -
Economic & Intelligent
Self-use PV generation to reduce carbon emissions; Daytime charge and discharge at night to save electricity bill; -
Easy to Install
Plug and play, easy to install; Stackable battery packs, flexible expansion of standby power.
High-voltage Batteries: MH Series iBAT-M-5.12H
-
High Performance
LFP prismatic battery cell, high safety; -
Small volume & High Capacity
Modular drawer style design, battery capacity 5.12kWh; -
High Safety & Reliable
With superior vehicle-level BMS, more reliable protection functions; -
Easy to Install
Fool-proofing design, plug and play -
Long Service Life
Life cycles > 6000 times -
Flexible Applications
Scalable to max.153.6kWh;
High-voltage Batteries: RH Series iBAT-R-2.56H
-
Flexible Applications
Each battery 2.56kWh, scalable to 30.72 kWh; Applicable to 1 & 3 phase HV hybrid inverters; -
Safety & Reliable
LiFePO4 prismatic battery cell, high safety; Secured by integrated superior vehicle-level BMS; -
High Performance
High power emergency-backup when outage, lP65 for both indoor and outdoor installation; -
Easy Installation
Compact and light, quick installation and configuration, Prefabricated cables and connectors for plug and play.
Wall-mounted Low-voltage Batteries: iBAT-W-5.12L
-
High Performance
A-level LFP battery cell, high safety; -
Long service life
DOD up to 93%, cycle life>6000 times; -
High Safety & Reliable
With superior vehicle-level BMS, more reliable protection functions; -
Quick commissioning
Automatic lD assignment
-
Easy to install
Three installation methods flexible use in different sceneries.
Low-voltage Batteries: ML Series iBAT-M-5.32L
-
High Performance
LFP prismatic battery cell, high safety; -
Long service life
Life cycle > 6000 times; -
High Safety & Reliable
With superior vehicle-level BMS, more reliable protection functions; -
Small volume & High Capacity
Modular drawer style design, battery capacity 5.32kWh;
-
Easy to install
Fool-proofing design, plug and play;
-
Flexible Applications
Scalable to 21.28kWh/31.92kWh based on needs.
Battery System: iBAT-WBS-215H
-
High Quality Battery Cell
Long cycle life: More than 6000 cycles @ 80% DOD:
Passed International Certifications: EC 62619; UL1973.UL9540A.UN 38.3.GB/T 36276,
Meet the most stringent cell intrinsic safety requirements; -
Integrated Production
More than 20 complete control processes
More than 100 MES data points
More than 500 quality control points
All data upload to the cloud for long-term traceability; -
Modular Design
Avoid short circuit, flexible buffering between cells, overall
elastic restraint to reduce the influence of cell expansion:
Air duct between cells effectively control heat accumulation & avoid thermal runaway;
-
Rigorous Tests
Passed 28 safety& reliability tests, 500 performance testing;
-
Thermal Management System
Perfect thermal management technology through simulation
and actual testing, to control the temperature rise in the
battery system to <5°C; -
Operation Guarantee
Two-stage battery safety management system
Full coverage of key sampling points to build a complete loT
Real-time monitoring feedback, fault diagnosis and warnings
Triple protection, blocking risk spread.
CONTACT
Contact Us
Office Address
NO. 96, Chang'an Street, Airport Economy Zone, Zhengzhou, Henan, China.
Email: info@sanopower.com
Mob: +86-1859-5505-568
WhatsApp: +86-1859-5505-568
